Ankle Monitor Charging: Know When It's Fully Charged

Knowing when your ankle monitor is fully charged is important, as you are required to keep it charged daily as part of your sentence or order. To fully charge a low battery, it takes about 2 hours. You will know when your ankle monitor is fully charged when the “Power” light on the charger turns from red to green. Additionally, the tracker vibrates when connected to and disconnected from the charger.

The power light turns green

When the power light on your ankle monitor turns green, it means that the battery is fully charged. This typically takes about two hours. You can then unplug the charger.

The power light turning green is one of several ways that ankle monitors indicate their battery life. When the battery is low, the device will vibrate three times in a row and once every 10 minutes until it is plugged into a charger. The power LED will glow red during this time. A rapidly flashing blue light indicates that the device is charging from a low battery, while a pulsing blue light means that the battery is more than 50% charged but not yet fully charged.

It is important to keep your ankle monitor charged. If the battery dies, the monitoring company will be contacted, although this may take some time.

The ankle monitor vibrates

If your ankle monitor vibrates, it could mean a few things. Firstly, it may indicate that the battery is low and needs to be charged. In this case, you should see a red power LED light. Make sure to charge your device for at least two hours daily to keep it functional.

Secondly, your ankle monitor may vibrate if you have departed from the permitted perimeter. This is a warning to alert you that you have left the designated area and need to return. Additionally, if you are in a structure with many metal walls or walls that block the monitor's signal, the vibration may be triggered as the device experiences signal interference.

Furthermore, if your Probation Officer (PO) attempts to contact you, your ankle monitor will vibrate to notify you of their attempt. This could be for various reasons, and you should follow the necessary procedures to get in touch with them as soon as possible.

Lastly, if your ankle monitor is experiencing technical difficulties, it may vibrate to indicate a problem. In this case, you should contact your Police Officer or the company that installed the monitor to seek assistance and resolve the issue.

The blue light stops flickering

When the blue light on your ankle monitor stops flickering, it means that the device has finished charging. This stable blue light indicates that the battery has a charge greater than 50% but is not yet fully charged.

To ensure that your ankle monitor is fully charged, you should wait until the blue light becomes stable and then leave it to charge for a little while longer. Once you see a solid green light on the charger, you will know that your ankle monitor is fully charged and you can then unplug it.

It is important to note that the charging process may take up to two hours to reach a full charge. During this time, you are free to walk around the room and carry out most of your normal activities within your home environment, as the charging cord is long enough to provide some mobility.

Remember, proper maintenance of your ankle monitor is crucial, and daily charging is required. By keeping your device charged, you can avoid any complications that may arise from a dead battery or a lost signal.

The red light turns solid

When the red light turns solid, it means that the device is powered on. If the red light on the internal battery gently blinks, it means that the device is charging. If the internal battery charger is defective, the red indicator will rapidly blink. When the yellow light flashes slowly, the gadget is attempting to obtain a valid GPS fix.

If the battery is low and needs to be charged, the device will vibrate three straight times and once every 10 minutes until it is connected to the charger. The Power LED will glow red during this time. The GPS LED will also flicker red. When the device is plugged into the charger, the blue lights will illuminate. If the red light is on, it means that the device is low on battery and requires charging.

A rapidly flickering blue light indicates that the device is charging, but the battery is still low. A pulsing blue light means that the device has a charge greater than 50% but is not yet fully charged. When the ankle monitor is fully charged, the green battery light on top will illuminate solidly, and you can then unplug the charger.

The charger's green light blinks

If the charger's green light is blinking, this means that your ankle monitor is fully charged. At this point, you can unplug the charger.

When charging your ankle monitor, you will notice that the light on the charger will first be red, indicating that the device is low on battery and requires charging. As the ankle monitor charges, you will see a blue light. A rapidly flickering blue light means that the device has a low battery and is charging. A pulsing blue light means that the device has a charge greater than 50% but is not yet fully charged.

The ankle monitor must be charged daily for at least two hours. It is important to note that the battery life of an ankle monitor degrades over time, and you may not get the full battery life even when the device is fully charged. Therefore, it is recommended to charge the device for at least two hours each day to ensure it remains functional.

Additionally, it is important to be aware of other indicators that your ankle monitor may need attention. For example, the ankle monitor will vibrate when the battery is low, and it will also vibrate when being connected to or disconnected from the charger.

Frequently asked questions