Connecting Pansonic Sb Subwoofer To Studio Monitors: A Step-By-Step Guide

Adding a subwoofer to a studio monitor can improve the bass response of your audio setup. This paragraph will discuss how to hook up a Panasonic SB subwoofer to a studio monitor, including the necessary connections and settings adjustments.

Attach the rubber feet to the subwoofer's bottom

To attach the rubber feet to the bottom of your Panasonic SB subwoofer, first check that you have the correct number of rubber feet for your subwoofer model. You should also check that the rubber feet are compatible with the weight of your subwoofer. For example, a 40-pound subwoofer would need 50 duro 1.5" hemispheres x4.

Once you have the correct number and type of rubber feet, you can attach them to the bottom of your subwoofer. This will help to prevent your subwoofer from moving, especially if it is on a smooth surface like a wooden floor. The rubber feet will also help to isolate the subwoofer from the surface it is placed on, reducing vibration and improving sound quality.

There are many different types of rubber feet available, including:

• Soundrise Domes Isolation Pads - these silicone pads are durable and non-slip, and can be stuck to the bottom of your subwoofer with adhesive.
• Reliable Hardware Company RH-1606-8-A Rubber Foot, Black - these basic rubber feet can be attached to the bottom of your subwoofer with adhesive or another suitable method.
• SVS SoundPath Subwoofer Isolation System - this is a specialised product designed to isolate your subwoofer and improve sound quality.
• Sorbothane vibration isolating hemispheres - these are designed to isolate vibration and improve sound quality, but may stain wooden floors.

Once you have chosen the correct rubber feet for your subwoofer, follow the manufacturer's instructions to attach them securely to the bottom of your subwoofer. This may involve using adhesive or another type of fixing. Make sure that the rubber feet are firmly attached before placing your subwoofer on a surface or testing the sound.

Place the subwoofer in the room

When placing a subwoofer in a room, you should consider the following:

Room 'Nodes'

Deep bass is less directional than treble or midrange, so a subwoofer can be placed almost anywhere in a room. However, you can achieve better results by finding a room 'node'. To do this, place the subwoofer where you usually sit and play a piece of music with plenty of bass. Disconnect your speakers and walk around the room, listening to the low frequencies. You will hear the bass get stronger and weaker as you move around the room due to the interaction of the bass notes and your room's acoustics. Mark these spots with tape on the floor. These are the 'nodes', and your subwoofer should be placed in one of these locations.

Number of Subwoofers

The more subwoofers you have in a room, the better the bass response will be. With two subwoofers, you can reduce the effect of standing waves, where certain bass frequencies are either too quiet or too loud. Placing the subwoofers in different spots in the room will even out the frequency response. With four subwoofers, you can achieve extremely even bass response across all seats in a home theatre.

Subwoofer Placement

For a single subwoofer, it is recommended to place it on the front wall, preferably towards one of the front corners. This will couple the subwoofer better to the room, providing more bass impact. If you have two subwoofers, you can place them both on the front wall near the corners, or in diagonally opposite corners. This will address the natural room resonance created by both the length and width of the room.

Practical Considerations

When placing a subwoofer, it is important to consider the practical aspects of the room. The subwoofer should be placed in a location that is convenient and out of the way. Proximity to a power point should also be considered. Additionally, Panasonic warns against attaching its SB subwoofers to walls or ceilings, and against placing the device in direct sunlight, near heating appliances, or in locations with high humidity.

Connect the monaural connection cable to the subwoofer output

To connect a Panasonic SB subwoofer to your studio monitor, you will need to use the included monaural connection cable. This cable will connect the subwoofer output on your receiver or TV to the input jack on the rear of the subwoofer.

• Ensure you have the correct cable: It should be a monaural connection cable, which is typically included with your Panasonic SB subwoofer.
• Locate the subwoofer output: On your receiver or TV, find the subwoofer output jack. This is usually labelled clearly and may be colour-coded (often in black).
• Connect one end of the cable to the subwoofer output: Insert the appropriate connector into the subwoofer output jack on your receiver or TV. Make sure it is securely connected.
• Route the cable: Carefully route the cable to the rear of the subwoofer. Ensure that the cable is not tangled or placed in a location where it could be damaged.
• Connect the other end of the cable to the input jack on the subwoofer: Again, make sure it is securely connected. The input jack on the subwoofer is typically located on the rear of the unit.
• Check the connection: Before turning on the devices, double-check that the cable is securely connected to both the receiver/TV and the subwoofer.
• Power on the devices: Plug in the power cord for the subwoofer and turn it on using the "Power" button. Also, ensure that your receiver or TV is turned on and sending an audio signal.
• Adjust the settings: Depending on your preferences and environment, you may need to adjust the "Low Pass Filter," "Volume," and "Phase" controls on the rear of the subwoofer.

By following these steps, you will be able to connect the monaural connection cable from the subwoofer output on your receiver or TV to the input jack on the Panasonic SB subwoofer. This will allow you to enhance the bass response and improve your listening experience.

Connect the power cord to an electrical socket

To connect the power cord to an electrical socket, begin by locating the power cord that came included with your Panasonic SB subwoofer. This power cord should be connected to the rear of the subwoofer. Once you've established this connection, you can proceed to plug the other end of the power cord into an available electrical socket in your room. Ensure that the socket is easily accessible and not obstructed by furniture or other objects.

It is important to follow the specific guidelines provided by Panasonic for the placement of your subwoofer. The company advises against attaching the subwoofer to walls or ceilings. Additionally, avoid placing the device in direct sunlight, near heating appliances, or in areas with high humidity. These precautions are essential for the optimal performance and longevity of your Panasonic SB subwoofer.

Before powering on your subwoofer, make sure that it is properly positioned within the room. Refer to the user manual or online resources for guidance on optimal placement for the best audio experience. Once you have found the ideal location, you can proceed to plug the power cord into the electrical socket and turn on the subwoofer using the "Power" button.

After powering on the subwoofer, you can start sending an audio signal to the device by playing audio through your receiver or turning on your television. Depending on your specific setup, you may need to adjust the settings on your receiver to enable the subwoofer output. Refer to your receiver's manual for detailed instructions. Once the audio signal is transmitted, you can fine-tune the sound by adjusting the "Low Pass Filter," "Volume," and "Phase" controls on the rear of the subwoofer to match your preferences and the acoustics of the room.

By following these steps, you will successfully connect the power cord of your Panasonic SB subwoofer to an electrical socket, ensuring that your device is ready for use and delivering enhanced bass response for an immersive listening experience.

Adjust the Low Pass Filter, Volume and Phase controls

Adjusting the Low Pass Filter, Volume and Phase controls on your subwoofer will help you get the best sound for your setup.

The Low Pass Filter controls the crossover point, which is the frequency at which the subwoofer takes over from the other speakers in your system. A good rule of thumb is to set the Low-Pass Filter to a value approximately equal to (or below) 70% of your main speaker's lowest frequency response. For example, if your speaker's frequency response goes down to 43Hz, 70% of that is 30.1, so you should set the subwoofer's low pass filter to 30Hz. You can also start with a setting of 35Hz if you're uncertain of your main speaker's low-frequency response.

Once you've set the Low Pass Filter, you can adjust the volume of the subwoofer to your taste. The Volume knob on the subwoofer is also known as the Level/Gain knob. You can set the knob to about 60-75% (about 2 or 3 o'clock) and then control the subwoofer volume within your receiver or pre-amp settings.

The Phase control manages the polarity of the frequencies outputted. If you have two subwoofers in your setup that are facing each other, put one at 0 degrees and the other at 180 degrees so that they don't cancel each other's frequencies out.

Frequently asked questions