Monitor Setup For Dji Ronin And 5D Cameras

how to hook up monitor with dji ronins and 5d

If you're looking to hook up a monitor with a DJI Ronin and 5D, there are several ways to do so. One method is to use the accessory mounting plate and connect it to the M4 screw hole of the gimbal. This will allow you to attach a Magic Arm which can then be used to mount an external monitor. Another option is to use a minimalistic setup with a quarter 20 adapter and a friction arm that can be screwed onto the side of the Ronin. Additionally, you can use an HDMI output module if you're looking to hook up a controller to a monitor.

shundigital

Mounting an external monitor to the Ronin S using the M4 screw hole

To mount an external monitor to the Ronin S using the M4 screw hole, you will need to attach an accessory mounting plate to the gimbal. This will allow you to connect a Magic Arm to the 1/4 screw hole on the mounting plate, and then attach an external monitor to the arm.

  • Purchase an accessory mounting plate that is compatible with the Ronin S, such as the SmallRig Monitor Mount Holder (model number: 2214).
  • Remove the small plate that covers the electronic contacts on the side of your Ronin S.
  • Attach the accessory mounting plate to the side of the gimbal using two M4 screws.
  • Connect a Magic Arm to the 1/4 screw hole on the mounting plate.
  • Attach your external monitor to the Magic Arm.

Note: You may need to purchase additional accessories, such as a Magic Arm, to complete this setup.

There are also alternative methods for mounting an external monitor to the Ronin S that do not require the use of the M4 screw hole. These methods may involve using a different type of mounting plate or adapter, or a different type of arm or clamp to hold the monitor. Some users have also suggested using an iPod Touch or a small, lightweight monitor to avoid affecting the balance of the rig.

shundigital

Using a magic arm to connect an external monitor to the Ronin S

To connect an external monitor to the Ronin S, you will need to use a magic arm. This can be done by following these steps:

  • Mount the accessory mounting plate to the M4 screw hole of the gimbal.
  • Connect the magic arm to the 1/4 screw hole on the mounting plate.
  • Mount the external monitor to the magic arm.

It is important to note that the accessory mounting plate may not be included in the kit of the Ronin S, and may need to be purchased separately. Additionally, the magic arm is an accessory that is used to connect the monitor, and the model may differ depending on the monitor being used.

There are also alternative options available for mounting an external monitor to the Ronin S, such as using a Cine Arm or a specific mounting product from SmallRig.

Furthermore, when mounting an external monitor, it is important to consider the balance of the rig and the weight of the monitor. A heavier monitor may affect the overall balance and make it difficult to carry.

shundigital

Using a micro USB and HDMI cable to connect an external monitor to the Nikon D850

To connect an external monitor to the Nikon D850, you will need a High-Definition Multimedia Interface (HDMI) cable. You can use the optional HC-E1 HDMI Cable, which has a type C connector for connection to the camera and a type A connector for connection to HDMI devices. Alternatively, you can use a third-party type C HDMI cable.

  • Turn off the camera. It is important to always turn off the camera before connecting or disconnecting any cables.
  • Connect the HDMI cable. Insert the HDMI cable into the HDMI port on the Nikon D850. The HDMI port is located on the left side of the camera, next to the USB port.
  • Connect the external monitor. Plug the other end of the HDMI cable into the HDMI input port on your external monitor.
  • Power on the devices. Turn on both the camera and the external monitor.
  • Select the correct input. Use the controls on your external monitor to select the HDMI input that matches the port you connected the cable to. For example, if you connected the cable to HDMI port 1 on the monitor, select HDMI input 1.
  • Configure HDMI settings. On your Nikon D850, go to the setup menu and select the HDMI option. Here, you can adjust the output resolution and other advanced HDMI options.
  • Use the external monitor. Once you have made the necessary connections and configurations, you can now use the external monitor to view the live feed from your Nikon D850.

Additionally, if you want to prevent accidental disconnection of the HDMI cable, you can use the supplied HDMI/USB Cable Clip. Attach the clip to the HDMI cable as shown in the user manual, and make sure to keep the monitor in the storage position when using the cable clip.

Please note that Nikon does not recommend using the camera with power connectors inserted into both the camera and the MB-D18 battery pack simultaneously.

shundigital

Using a minimalistic setup with a vision neck handle to mount a monitor to the Ronin S

There are a few ways to mount a monitor to a DJI Ronin S using a minimalistic setup with a vision neck handle. Here is one way:

First, you will need to acquire the necessary equipment. You will need a vision neck handle, such as the one from Digital Photo, an Allen wrench, an HDMI cable, and a small tilt arm from SmallRig. It is also recommended to have a twisty tie to keep the setup tidy.

Once you have the equipment, follow these steps:

  • Mount the vision neck handle to the side of the Ronin S. This will provide extra support and stabilization and can also be used as an additional handle.
  • Using the Allen wrench, remove the top screws and handle parts from the vision neck handle to keep the setup minimalistic.
  • Undo the M6 screws to remove the little plate.
  • Use the longer F6 screws that came with the handle to secure the plate.
  • Attach the small tilt arm from SmallRig to the monitor.
  • Mount the monitor to the vision neck handle using the two screws that came with the tilt arm.
  • Angle the monitor up completely so that your hand can still wrap around it. This will also provide a nice viewing angle.
  • Connect the HDMI cable to the monitor.
  • Use a twisty tie to neatly secure the HDMI cable.

This setup provides a solid and stable mounting solution for your monitor, ensuring that it stays firmly in place without moving around.

Another minimalistic setup using a different type of mount is also described in the source material if you would like me to outline that as well.

shundigital

Using a shoulder strap to mount a monitor to the Ronin S

Firstly, you will need to acquire the necessary equipment. This includes a shoulder strap, such as the CAMVATE Extension Mounting Ring with a padded neck shoulder strap, and a mounting plate, such as the spider clamp mounting plate from Digital Photo. You will also need an accessory mounting plate, which can be purchased separately if it did not come with your Ronin S.

Once you have all the required equipment, follow these steps:

  • Mount the accessory mounting plate to the M4 screw hole of the gimbal on your Ronin S.
  • Attach the magic arm or a similar mounting arm to the 1/4 screw hole on the mounting plate.
  • Secure the external monitor to the mounting arm.
  • Clamp the spider clamp mounting plate to the top of the Ronin S, ensuring that the I-hook is facing the same direction as the thumb stick, towards the operator.
  • Attach the shoulder strap to the I-hook on the mounting plate.
  • Adjust the viewing angle of the monitor as needed.
  • Connect the HDMI cable to the monitor and secure any excess cable with a twist tie to keep things tidy.

This setup provides the benefit of taking the weight off your hands and arms, allowing you to shoot for extended periods without fatigue. It also offers a stable and secure way to mount your monitor, ensuring that it stays in place during use.

You can also explore other options for monitor mounting, such as using a vision neck handle or a quarter 20 adapter with a friction arm, depending on your specific needs and preferences.

Frequently asked questions

To hook up an external monitor to your DJI Ronin-S, you will need to mount the accessory mounting plate to the M4 screw hole of the gimbal. There is a 1/4 screw hole on the mounting plate which is used to connect the Magic Arm. Then an external monitor can be mounted to the arm.

You will need an HDMI output to install an HDMI cable. You can buy the DJI HDMI add-on module.

You can use a female-to-male micro USB extension cable.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment