Charging Your Kodak Camera: A Step-By-Step Guide

how do you charge a kodak camera

There are several ways to charge a Kodak camera, and the method you choose will depend on the model of your camera and what charging equipment you have to hand. Some Kodak cameras can be charged via USB, either by connecting to a computer, power bank, or wall socket with a USB adapter. Other Kodak cameras require a specific charger, which may be a universal Lithium-ion battery charger or an AC adapter and cable.

Characteristics Values
Charging methods USB cable, power bank, wall socket, Kodak USB adapter, Kodak Universal Li-Ion battery charger
USB cable compatibility Depends on the camera model. Compatible with Kodak EASYSHARE M-series and Z-series, and Kodak V1073, V1233, V 1253, V1273.
Charging time Approximately 3 hours
Charging indicator Red light indicates the camera is charging, green light indicates charging is complete

shundigital

Charging a Kodak camera without a charger

There are several ways to charge a Kodak camera without its dedicated charger. However, it's important to note that not all Kodak cameras support USB charging. Some models require the supplied charger and can only be charged using the right AC adapter and cable.

Using a USB Cable

You can use a USB cable to charge your Kodak camera from a computer or a power bank. First, ensure you have the right type of USB cable. Most Kodak cameras use USB U-8 or USB 2.0 cables, which can be found on various online platforms or at digital multimedia stores.

Connect one end of the USB cable to your camera and the other end to a power source, such as your computer or a power bank. Your camera should start charging automatically.

Charging via a Computer

To charge your Kodak camera from a computer, follow these steps:

  • Turn on your computer and ensure it is not in hibernation or sleep mode.
  • Turn off your Kodak camera.
  • Ensure you have the correct battery installed properly in your camera.
  • Connect both ends of the USB cable to your camera and your computer.
  • For some models, like the EASYSHARE M873 and M883, you may need to turn on the camera.
  • Your camera will begin charging. In some cases, you might need to select the 'Charge Only' option on your PC.

Using a Kodak USB Adapter

You can also charge your Kodak camera directly from a wall socket using a Kodak USB adapter. First, check your user manual to ensure your camera supports USB adapter charging. Then:

  • Turn off your camera.
  • Insert the correct batteries.
  • Connect the USB adapter to a wall socket.
  • Connect the other end of the adapter to your camera.
  • It will start charging. For some models, like the M873 and M883, you may need to turn them on.
  • The red light indicates the camera is charging, and the green light indicates it is fully charged.

Using a Power Bank

A power bank is another convenient option to charge your Kodak camera on the go. First, check your user manual to confirm that your camera model supports USB charging. Then, determine the power consumption of your camera battery.

To charge using a power bank:

  • Ensure your power bank is charged.
  • Turn off your camera.
  • Connect a USB cable to your camera and the power bank.
  • Switch on your power bank to start charging the camera.

shundigital

Using a power bank to charge a Kodak camera

To start, check your Kodak camera's user manual to see if it supports USB charging. Next, take out the battery from your camera and note the amount of power it consumes. If your battery requires 800 mAh, for example, you can charge it 10 times with an 8000 mAh power bank.

Before you begin charging, check the battery of your camera and ensure it is connected properly to the battery slot. Then, turn off your camera and connect a USB cable to your camera, and connect the other end to your power bank. Finally, switch on your power bank and it will start charging.

It is important to ensure your power bank is charged beforehand. This method is especially useful for those who go on expeditions or travel for many days with their cameras.

Please note that not all Kodak cameras support USB charging. The following Kodak EASYSHARE M-series cameras can be charged using a USB cable: M340, M380, M420, M753, M763, M853, M863, M873, M883, M893, M1033, M1063, M1073, and M1093.

The Kodak EASYSHARE Z-series cameras that support USB charging include the Z1015 IS and Z950.

The following Kodak cameras can also be charged using a USB cable: V1073, V1233, V1253, and V1273.

shundigital

Charging a Kodak camera with a USB cable

First, check your camera model to ensure it supports USB charging. Not all Kodak cameras can be charged via USB. The compatible models include the EASYSHARE M320, M340, M380, and many others. You can refer to Kodak's website or your camera's user guide for a full list of compatible models.

Once you've confirmed your camera can be charged via USB, follow these steps:

  • Turn off your camera.
  • Ensure that the correct battery is installed properly in your camera. This information can be found in your camera's Extended User's Guide.
  • Connect the USB cable to your camera. If you are using a computer to charge your camera, connect the other end of the USB cable to the USB port on the computer. Do not use a USB hub. If you are using a USB wall charger, plug the charger into a power outlet before connecting the USB cable.
  • If you are using an EASYSHARE M873 or M883 Zoom Digital Camera, turn on your camera.
  • Allow the camera battery to charge. Charging typically takes around 3 hours. Refer to your Extended User's Guide to learn how to determine when charging is complete and for information on battery life expectancy.

It is important to note that when charging your camera via a computer, you should ensure that the computer's hibernation, standby, and sleep modes are turned off. The steps to do this will vary depending on your operating system. For a Windows XP Operating System, go to Start > Settings > Control Panel > Power Options. Then, click on the Power Schemes tab and set "System standby" and "System hibernates" to Never. Finally, click Apply, then OK.

Additionally, only use a USB 2.0 or 3.0 cable to charge your Kodak camera. Using an older USB 1.0 cable could damage the camera or cause it to take longer to charge.

By following these steps, you can safely and effectively charge your Kodak camera using a USB cable.

shundigital

Charging a Kodak camera with a computer

Not all Kodak cameras can be charged using a USB port. However, if you have one of the following cameras, you can charge it from a computer using a USB cable:

  • EASYSHARE M320, M340, M380, M420, M753, M763, M853, M863, M873, M883, M893, M1033, M1063, M1073, M1093, Z1015 IS, and Z950 Digital Cameras
  • EASYSHARE V1073, V1233, V1253, and V1273 Digital Cameras

To charge your Kodak camera with a computer:

  • Turn on your computer.
  • Ensure your computer is not in hibernation or sleep mode.
  • Turn off your camera.
  • Check that the correct battery is installed properly in your camera.
  • Connect the USB cable to your camera and the USB port on your computer. Do not use a USB hub.
  • If you have an EASYSHARE M873 or M883 Zoom Digital Camera, turn on your camera.
  • Wait for your camera battery to charge (approximately 3 hours).

Please note that charging your camera from a computer may take longer than charging it with the supplied charger.

shundigital

Charging a Kodak camera using a USB adapter

Not all Kodak cameras can be charged using a USB adapter, so it is important to check your camera's Extended User's Guide before attempting to charge it.

The following Kodak cameras can be charged using a USB adapter:

  • EASYSHARE M320, M340, M380, M420, M753, M763, M853, M863, M873, M883, M893, M1033, M1063, M1073, M1093, Z1015 IS, and Z950 Digital Cameras.
  • EASYSHARE V1073, V1233, V1253, and V1273 Digital Cameras.

If you have one of the above camera models, follow these steps to charge your Kodak camera using a USB adapter:

  • Turn off your camera.
  • Verify that the correct battery is installed properly in your camera. Refer to your Extended User's Guide for this information.
  • Plug the USB AC adapter into a working power outlet.
  • Connect the USB cable to your camera and to the USB AC adapter.
  • If you have an EASYSHARE M873 or M883 Zoom Digital Camera, turn on your camera.
  • Wait for your camera battery to charge. This typically takes around three hours. Refer to your Extended User's Guide to learn how to determine when charging is complete and for information on battery life expectancy.

Note: When charging your Kodak camera using a USB adapter, ensure that your computer's hibernation, standby, and sleep modes are turned off.

Frequently asked questions

You can charge your Kodak camera using a KODAK USB AC Adapter. First, turn off your camera and insert the correct batteries. Then, plug the USB AC adapter into a working power outlet and connect the USB cable to your camera.

Yes, you can charge your Kodak camera using a USB cable connected to your computer. First, ensure your computer is turned on and is not in hibernation or sleep mode. Then, turn off your camera and connect the USB cable to your camera and computer. Note: This method may take longer than charging via a wall socket.

Aside from charging your Kodak camera via a wall socket or computer, you can also charge it using a power bank or by charging the batteries separately with a universal Lithium-Ion battery charger.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment