Ankle Monitor Flashing Purple: What Does It Mean?

If your ankle monitor is flashing purple, it could be an indication that your device is currently updating. While a flashing red light is often due to a low battery, each ankle monitor is different, and you should refer to the documentation that came with your device. If you no longer have the documentation, you can try to find a manual for your device online.

Ankle monitor is updating

If your ankle monitor is flashing purple, it is likely that your device is updating. While the specifics of each ankle monitor vary depending on the manufacturer, a flashing purple light typically indicates that a software update is in progress.

Ankle monitors, also known as electronic monitoring devices, are commonly used by the criminal justice system to track individuals on probation or parole. These devices employ GPS technology to monitor the wearer's location.

It is important to refer to the documentation that came with your ankle monitor to understand the specific meanings of the lights and signals it emits. This documentation should outline the various colour codes and their corresponding meanings. If you no longer have access to this information, you can try searching online for a manual for your specific device.

If you encounter an issue with your ankle monitor, such as a flashing purple light that does not seem to stop, it is recommended to contact the monitoring service, Pretrial Services, or the Probation and Parole Officer assigned to your case for further assistance. They will be able to provide you with specific instructions or guidance based on the model of your ankle monitor.

Remember, if you suspect that your ankle monitor is malfunctioning or if you are unsure about the meaning of the flashing purple light, it is important to address the issue promptly to avoid any potential complications or violations.

Monitor the lights and function

Ankle monitors are electronic monitoring devices used by the criminal justice system to track the location of individuals on probation or parole. These devices are equipped with GPS technology and are worn on the ankle. Each ankle monitor is different, depending on the manufacturer. Therefore, it is important to refer to the documentation that came with the device to understand what each light means.

A purple light on your ankle monitor typically indicates that your device is being updated. If the purple light remains on even after the installation of the update has finished, you should contact customer support.

In addition to the purple light, there are several other light signals you should be aware of. A solid green light indicates that the battery is charged and the sensor is switched on but not connected. A blinking green light means that the device is active and recording a session but is not connected to your mobile device.

A solid blue light means that the sensor is connected to your device and ready to record. A slowly blinking blue light indicates that the sensor is recording and acquiring data, while a rapidly blinking blue light shows that the sensor is synchronizing data.

A solid red light means that the battery is low and needs to be charged. A blinking red light indicates that the sensor is recording but the battery is low. An orange light means that the device is charging.

If you encounter any issues with your ankle monitor, such as a pink/red flashing light, or if the device is not functioning properly, be sure to contact the appropriate support services for assistance.

Low battery

If your ankle monitor is flashing purple, it could be an indication that the device is updating. While the purple flash may be a standard part of the updating process, if the LED light remains stuck on purple when there is no update in progress, you should contact customer support for assistance.

It is important to note that different ankle monitor devices may have varying light indications, depending on the manufacturer. Therefore, it is advisable to refer to the documentation that came with your device or contact the monitoring service, Pretrial Services, or the Probation/Parole Officer assigned to your case for specific instructions. They can provide you with the necessary information regarding the meaning of the flashing purple light and any required actions on your part.

In some cases, a flashing light on an ankle monitor could indicate a low battery. While this is typically associated with a red blinking light, it's always a good idea to ensure your device is adequately charged to avoid any potential issues. Most ankle monitors require charging every 24-48 hours, and they usually have a backup battery that lasts a few hours when the main battery is low.

Technical glitches

Ankle monitors, also known as electronic monitoring devices, are commonly used by the criminal justice system to monitor individuals on probation or parole. These devices are typically equipped with GPS technology to track the wearer's location. While these monitors are designed to be reliable, they can occasionally experience technical glitches, just like any other piece of technology.

If your ankle monitor is flashing purple, it could be due to a technical issue. Sometimes, electronic devices can encounter unexpected errors or bugs that cause them to malfunction temporarily. This could be due to a variety of factors, such as software compatibility issues, hardware failures, or even interference from external factors. In such cases, the purple flashing light might indicate that the device is experiencing an internal error or has entered a faulty state.

It is important to remember that technical glitches in ankle monitors are usually rare. These devices are designed to be robust and reliable, as they serve a critical purpose in monitoring individuals. However, just like any other piece of technology, they are not entirely immune to occasional hiccups.

If you suspect that your ankle monitor is flashing purple due to a technical glitch, the first step is to stay calm. Contact the ankle monitor IT department or the monitoring company for assistance. They will be able to guide you through the necessary troubleshooting steps and determine if there is indeed a technical issue with your device. In some cases, they may advise you to reset the device, change the settings, or perform other corrective actions.

In the meantime, it is important to continue adhering to the conditions of your probation or parole. Even if your ankle monitor is experiencing technical difficulties, it is crucial to maintain compliance to avoid any potential violations or complications. Remember to keep your device charged, as a low battery could exacerbate the issue.

Contact the monitoring company

If your ankle monitor is flashing purple, it is likely undergoing a software update. This is a common occurrence, and you should not be alarmed. However, if the flashing purple light persists for an extended period, it may indicate a more serious issue.

In such cases, it is advisable to contact the monitoring company for assistance. They will be able to provide you with specific instructions on how to resolve the issue and ensure that your device is functioning properly. Here are some reasons why you should contact the monitoring company:

• Technical Support: The monitoring company has a dedicated team of experts who are well-versed in the technology behind ankle monitors. They can provide you with guidance and troubleshooting steps to address any issues with your device. By contacting them, you can benefit from their knowledge and experience in resolving technical problems.
• Device Malfunction: In some cases, a flashing purple light may indicate a malfunction or an error with your ankle monitor. The monitoring company can help you identify whether the issue is due to a faulty device or another factor. They can also advise you on the next steps, such as arranging for a replacement or repair if necessary.
• Compliance and Legal Obligations: Ankle monitors are often used to track individuals' locations and ensure compliance with legal obligations, such as probation or parole requirements. If your device is malfunctioning, it could impact your ability to adhere to the set conditions. By contacting the monitoring company, you can ensure that they are aware of the issue and take the necessary steps to maintain your compliance.
• Timely Resolution: By promptly contacting the monitoring company, you can expedite the resolution process. They may provide you with real-time assistance, walk you through troubleshooting steps, or dispatch a technician to address the issue. This can help minimize any disruption caused by a malfunctioning device and ensure your peace of mind.
• Prevent Further Complications: A malfunctioning ankle monitor can potentially lead to more serious complications, such as violation charges or escape allegations. By proactively contacting the monitoring company, you can demonstrate your willingness to address the issue. This may work in your favor and help prevent any unintended consequences or legal complications arising from a malfunctioning device.

In conclusion, if your ankle monitor is flashing purple and you are unsure of the reason, it is always best to contact the monitoring company. They are equipped with the necessary tools and expertise to diagnose and resolve any issues with your device. By seeking their assistance, you can ensure the proper functioning of your ankle monitor and maintain compliance with any legal or monitoring requirements.

Frequently asked questions