Removing The Bezel From Your Nec As222wm Monitor

The NEC AccuSync AS222WM is a 22 widescreen LCD monitor. While there are no explicit instructions for removing the bezel from this monitor, a general guide for removing bezels from monitors can be found on Reddit. Additionally, the process for removing the base stand of the NEC AccuSync AS222WM is outlined in the product's user manual, which may be a useful starting point for further exploration. It is important to note that attempting to remove the bezel may void the warranty and cause damage, so proceed with caution.

Place the monitor face down on a non-abrasive surface

To remove the bezel from your NEC AS222WM monitor, you'll first need to place the monitor face down on a non-abrasive surface. This is an important step to protect your monitor from scratches or other damage during the disassembly process. Choose a flat, clean surface that is free of dirt or debris, such as a soft cloth or a smooth tabletop.

Once you've found a suitable surface, carefully lay the monitor down, making sure that the screen is facing towards the surface and the back of the monitor is facing up towards you. Take your time with this step to ensure that you don't accidentally drop or damage the monitor.

With the monitor securely in place, you can now begin the process of removing the bezel. This will involve using your thumbs to press and unlock the tabs holding the bezel in place. Be gentle but firm as you apply pressure to avoid causing any damage to the monitor or its components.

If you're unsure about the disassembly process, it's always a good idea to refer to the official user manual or seek guidance from a professional or experienced individual to ensure you don't accidentally damage your monitor.

Press bottom tabs upward with thumbs to unlock

To remove the bezel from your NEC AS222WM monitor, you'll first need to place the monitor face down on a non-abrasive surface. This is important to avoid damaging the screen.

Now, locate the bottom tabs. Using your thumbs, press these tabs upward to unlock the bezel. You may need to apply a firm but gentle pressure to achieve this. Be careful not to press too hard, as you don't want to damage the tabs or the screen itself.

Once the bottom tabs are unlocked, you can move on to the top tabs. Again, use your thumbs to press these tabs, but this time, press them downward to unlock.

After pressing and unlocking both the bottom and top tabs, you should now be able to remove the bezel from your NEC AS222WM monitor. If you're installing a flexible arm, refer to the user manual for the correct installation procedure, which includes using the provided screws to meet safety requirements.

Press top tabs down to unlock and remove the base stand

To press the top tabs down to unlock and remove the base stand of your NEC AS222WM monitor, follow these steps:

Begin by placing the monitor face down on a soft, non-abrasive surface, such as a microfiber cloth or towel, to protect the screen from scratches or damage. Ensure the base of the monitor is off the edge of the table.

With the monitor securely positioned, locate the bottom tabs. Using your thumbs, press these tabs upward to unlock. Afterward, press the top tabs down to unlock the base stand. You may need to apply some force, but be careful not to damage the plastic backing.

Once the top tabs are pressed down and unlocked, you can pull off and remove the base stand. If it does not come off easily, try using a small amount of mechanical oil on the joints to loosen it.

If you encounter any difficulties during the process, refer to the user manual for further guidance. It is important to have the manual, a screwdriver, and a safe work area prepared before beginning the process.

Connect the 15-pin mini D-SUB of the video signal cable and audio cable to the monitor

To connect the 15-pin mini D-SUB of the video signal cable and audio cable to the monitor, follow these steps:

• Identify the correct ports: The 15-pin mini D-SUB port on your monitor is also known as a VGA port. It has 15 pins arranged in three rows and is usually located on the back of the monitor. The video signal cable and audio cable should have compatible connectors that match the pins on the port.
• Prepare the cables: Ensure that the cables are not damaged and that the connectors are free of dust or debris.
• Connect the cables: Firmly insert the connectors of the video signal cable and audio cable into the corresponding pins on the VGA port. You may need to screw in the connectors by hand to secure the connection and prevent accidental disconnection.
• Test the connection: Once the cables are connected, turn on the monitor and the device(s) connected to it to ensure that the video and audio signals are transmitted properly.

It is important to note that the NEC AccuSync AS222WM monitor is designed for use with a flexible arm, and it should be mounted to an approved arm that can support its weight and provide necessary stability. This may require removing the base stand before connecting the cables. Always refer to the user manual for specific instructions and safety guidelines.

Mount the monitor to a flexible arm

To mount the NEC AS222WM monitor to a flexible arm, you'll first need to remove the base stand. Here's a step-by-step guide:

Removing the Base Stand

• Place the monitor face down on a non-abrasive surface.
• Using your thumbs, press the bottom tabs upward to unlock.
• Press the top tabs down to unlock and pull off the base stand.

Mounting the Monitor to a Flexible Arm

• Purchase a flexible arm that is VESA-compatible and suitable for your monitor's weight and size.
• Ensure that your flexible arm has the necessary screws and washers for mounting. The NEC AS222WM monitor requires four screws for installation.
• Follow the instructions provided with your flexible arm for mounting. Typically, this will involve attaching a mounting bracket to the bottom of the arm and securing it with screws.
• Attach the flexible arm to your desk using either a clamp or grommet mount, depending on your desk type and personal preference.
• Adjust the gas spring arm tension to suit the weight of your monitor. This is important to ensure the monitor stays at the desired height.
• Attach the monitor to the flexible arm using the provided screws and washers. Ensure that the arrow on the mounting plate is pointed up.
• Adjust the height and viewing angle of the monitor according to ergonomic guidelines. The monitor should be about 20 to 28 inches away from your face, with the top of the screen at or slightly below eye level.

By following these steps, you can mount your NEC AS222WM monitor to a flexible arm, providing a sleek and adjustable setup for your workspace.

Frequently asked questions