Charging Yi 4K Action Camera: A Step-By-Step Guide

The YI 4K Action Camera uses a rechargeable 1200mAh high-voltage 4.4V lithium-ion battery, which can record up to 120 minutes of 4K/30fps video on a single charge. To recharge the camera, power it off and use a USB cable to connect to an adapter or external power source. A full charge will take 90 minutes, and it is recommended to use a 2A input current power adapter.

Charging with a portable power bank

The YI 4K Action Camera can be charged with a power bank. The camera uses a 1010mAh Li-ion removable battery, which can be charged via a USB wall charger. When charging the camera with a power bank, it is recommended to remove the battery to prevent overheating and to ensure that the load stays on the power bank.

A normal USB data cable can be used to connect the camera to the power bank. The camera will function as normal while charging, and the size of the power bank will determine how long the camera can be used for. A 5000mAh power bank should provide at least 4 hours of recording time.

It is important to note that some power banks may turn off after a certain period if they do not detect enough load. This may cause the camera to stop recording after a certain amount of time.

When choosing a power bank, consider the capacity and size. A larger capacity will provide a longer recording time, but may be bulkier. For example, a 16000mAh power bank should be sufficient to charge up to 10 YI cameras but may be too large to fit in a pocket. A 10400mAh power bank offers a balance between capacity and portability.

Using a power bank to charge the YI 4K Action Camera is a convenient way to extend the battery life and ensure the camera can be used for longer periods without interruption.

Charging with a computer

To charge your YI 4K Action Camera with a computer, you will need a USB cable. The USB cable available with most action cameras is a micro-USB cable. This cord has a standard USB connector at one end that plugs into your PC. The other end will have a smaller micro-USB connector that plugs into the micro-B socket on your camera.

Before you connect your camera to your computer, make sure you have the correct USB cable. The YI 4K Action Camera uses a micro-USB cable, which has a smaller connector than a mini-USB cable. Once you have the correct cable, follow these steps:

• Connect the micro-USB connector to your camera: Locate the micro-B socket on your camera and plug in the micro-USB connector.
• Connect the standard USB connector to your computer: Plug the standard USB connector into one of your computer's USB ports.
• Allow the camera to charge: Once connected, your computer will supply power to the camera, and the charging process will begin. The charging time will depend on your battery's capacity and the power output of the USB port.
• Safe removal: After the camera is fully charged, safely remove the USB cable from the computer and then from the camera.

Note: When using a USB cable to connect the YI 4K Action Camera to a computer, the camera will enter U disc mode. In this mode, you can view and manage photos and videos but cannot capture new ones.

Charging with a car charger

Yes, you can charge your YI 4K Action Camera with a car charger. However, it is recommended that you remove the battery from the camera before charging it in your car. This is because the temperature within the car may be high, which may not be suitable for charging the camera.

To charge your YI 4K Action Camera with a car charger, first, open the car charger adapter in your car. Then, remove the battery from your camera by locating the battery cover on the camera and sliding it open. After that, take out the battery and set it aside. Now, connect the camera directly to the car charger using a USB cable. Ensure that the camera is powered off during the charging process.

The camera will be charging when you see a solid red light on the camera. A blinking red light indicates that the camera is still charging, while a solid blue light means that the camera is fully charged. It is important to disconnect the USB cable once the camera is fully charged to avoid overcharging.

Additionally, you can also use a portable charger to charge your YI 4K Action Camera. This option provides flexibility, as you can charge your camera on the go, even while recording.

Charging requirements

The YI 4K+ Action Camera uses a rechargeable 1200mAh high-voltage 4.4V lithium-ion battery. To charge the camera, you must first power it off. Then, use a USB cable to connect the camera to an adapter or external power source, such as a mobile power charger or PC. It is recommended to use the official YI adapter with a 2A input current. A full charge will take 90 minutes of continuous charging. You will know the camera is fully charged when the power indicator light turns off.

It is important to note that the input current should be 1A and the output voltage should be 5V. The YI 4K+ Action Camera has an innovative heat management system to reduce overheating while recording. However, the camera may still feel hot to the touch while charging. This is normal and should not affect the performance of the camera.

When charging the camera, it is recommended to disconnect any other devices that may be connected to the power source to ensure that the camera receives the full 1A input current. Additionally, it is important to use a compatible power adapter to avoid damaging the camera. The official YI adapter is recommended for this reason.

It is also possible to charge the YI 4K+ Action Camera using a portable charger. However, it is not recommended to use the camera while it is charging, as it may affect the performance and stability of the camera. If you need to use the camera for an extended period of time, it is best to fully charge the battery before use or use a portable charger to extend the battery life.

How to know when the battery is fully charged

To know when your YI 4K Action Camera battery is fully charged, simply look at the battery light. After 90 minutes of continuous charging, the battery will be fully charged and the battery light will automatically turn off. This is the same light that you can observe while the USB cable is connected for charging.

If your camera is not turning on, it could be that the battery is not charged. To check this, put the battery in the camera and charge it via USB cable. Then, observe the front panel light while the USB cable is connected for charging. If the front light does not turn on, unplug the battery connection. If the camera can be turned on without the battery, this could indicate a problem with the battery connection.

If the front panel light is on, use an adapter that meets the charging requirements to charge the camera and wait until the battery has full power. Then, unplug the USB cable, hold down the power button at the top, and try to reboot the camera. Observe the front panel light. If the front panel lights up in blue but the camera still cannot reboot, this could indicate a problem with the camera system.

If the front light is red and the camera cannot be turned on, this also indicates a problem with the camera system. In this case, remove and then reinsert the battery and reboot the camera. If the indicator is still red, repeat the previous step until the front light is blue and flashes three times. Then, put the SD card containing the firmware into the camera to update. If the blue light flashes, the update has begun. Wait until it is complete.

Frequently asked questions