Charging The Crosstour Action Camera: A Quick Guide

The Crosstour Action Camera is a popular choice for capturing high-quality footage in extreme conditions. Before using the camera, it is important to ensure that it is fully charged. The camera can be charged using the provided USB cable. The battery life of the camera is stated as up to 90 minutes, but in reality, users can expect about 80 minutes of recording time per included battery. Additionally, it takes around two hours to charge each battery. To maximise recording time, users can invest in a portable battery pack or purchase additional batteries with a higher capacity, such as the 1350mAh rechargeable batteries that are compatible with the Crosstour camera.

Charging via USB cable

To charge your Crosstour Action Camera via USB cable, follow these steps:

• Insert the battery: Make sure you have inserted a battery into your Crosstour Action Camera. This is important because the camera will not charge without a battery inside.
• Use the provided USB cable: Connect the smaller end of the USB cable to the charging port on your Crosstour Action Camera. The charging port is usually located on the side or bottom of the camera.
• Connect to a power source: Plug the other end of the USB cable into a power source such as a wall adapter, power bank, or computer USB port. If you are using a wall adapter, simply plug it into an electrical outlet.
• Allow time for charging: It takes approximately two hours to fully charge each battery in the camera. During this time, a charging indicator on the camera or the battery itself may light up or flash to indicate that charging is in progress.
• Safe removal: Once the camera is fully charged, safely remove the USB cable from the camera and power source. Do not unplug the cable abruptly as it may cause damage to the camera or the USB port.

By following these steps, you can ensure that your Crosstour Action Camera is properly charged via a USB cable. Remember to use the provided USB cable or a compatible replacement to avoid any issues.

Charging with an external battery pack

To charge your Crosstour Action Camera with an external battery pack, you'll first need to ensure you have a suitable battery pack. The camera's batteries are rated at 1,050mAh, so you'll need a higher-capacity power bank, ideally one that can output enough power to charge the camera. Look for power banks with higher mAh figures, but be wary of exaggerated claims.

Once you've chosen a suitable power bank, you'll need to connect it to your camera using a USB cable. The Crosstour Action Camera charges via a Micro USB cable, so ensure your power bank has a standard USB output port.

Connect the Micro USB end of the cable to your camera, and the standard USB end to the power bank. The camera should begin charging, and you can monitor its progress via the charging indicator on the camera.

It's important to note that charging times may vary depending on the output capacity of your power bank and the charging specifications of your camera. Always refer to the manufacturer's guidelines for charging times and safety precautions.

Additionally, be cautious when connecting and handling the Micro USB cable to avoid damaging the camera's Micro USB socket, as it can be fragile.

By following these steps, you can conveniently charge your Crosstour Action Camera using an external battery pack, ensuring you can capture your adventures without worrying about battery life.

Charging fully before first use

To ensure optimal performance and longevity of your Crosstour Action Camera, it is highly recommended to charge the device fully before its first use. This process is essential to establish a good foundation for the battery's overall health and longevity. Here are some detailed instructions to guide you through the process:

• Unbox your Crosstour Action Camera: Upon receiving your camera, carefully unpack the box to locate all the components, including the camera, charging cable, and battery.
• Insert the battery: Identify the battery compartment and insert the battery securely, ensuring proper alignment and connection.
• Connect the charging cable: Use the provided USB charging cable and connect it to the camera. The cable should fit snugly into the designated charging port on the camera.
• Plug the cable into a power source: You can connect the other end of the USB cable to a suitable power source, such as a wall adapter, power bank, or USB port on a computer. Ensure the power source is functional and able to provide a stable charge.
• Monitor the charging process: The charging process may take a couple of hours, depending on the battery capacity and power source. Keep an eye on the charging status by observing any indicator lights on the camera or battery. Some batteries may have LED indicators that change colour when fully charged.
• Initial charging duration: For the first charge, it is advisable to allow the battery to charge for an extended period, ideally until the charging indicator shows that it is fully charged. This helps calibrate the battery and maximize its capacity.
• Avoid interruptions during the initial charge: Try to avoid interrupting the charging process by unplugging the camera or turning it on during the initial charge. A full and uninterrupted charge helps set the stage for better battery performance in the long run.
• First-time setup (optional): While the camera is charging, you can familiarize yourself with the user manual and the camera's features. This time can be used to explore the camera's settings, mount options, and other accessories included with the Crosstour Action Camera.
• Complete the initial charge: Once the camera is fully charged, you can disconnect the charging cable. At this point, your Crosstour Action Camera is ready for its initial use and subsequent adventures!

Remember, the initial full charge is an important step to maximize your battery's potential and ensure a positive first experience with your new Crosstour Action Camera.

Charging duration

The Crosstour action camera should be charged using the provided USB cable. The charging duration for the Crosstour action camera is approximately two hours. This will give you around 80 minutes of usage per battery.

It is important to note that the camera will forget the date and time if the battery is removed for too long, so it is recommended to keep the batteries charged and swapped frequently.

To maximise the battery life, it is recommended to avoid frequent top-ups and instead allow the battery to run down to the stated minimum before giving it a full recharge. This will help prolong the life of the battery cells.

Additionally, when charging the camera, it is advisable to monitor the process and avoid leaving it unattended. This is a general safety precaution for lithium-ion batteries, which are commonly used in electronic devices.

By following these guidelines, you can ensure that your Crosstour action camera is adequately charged and maintained, providing you with a reliable recording device for your adventures.

Charging frequency

The Crosstour action camera comes with two rechargeable batteries that can be charged using the provided USB cable. The manufacturer recommends allowing the batteries to run down to the stated minimum (20% for the ToHLo external battery pack) before recharging to full capacity. This is said to prolong the life of the battery.

However, in real-world situations, it may not always be possible to let the battery run down before recharging. In such cases, it is advisable to avoid persistently topping up the battery after each short use, as this can also shorten its life. Ideally, the battery should be run down to the stated minimum and then given a full recharge.

Each battery takes about two hours to charge fully in the camera. To save time, you can purchase additional batteries and a dual charger, which allows you to charge two batteries simultaneously.

It is important to note that the camera will forget the date and time if the batteries are swapped while the camera is turned off. Therefore, it is recommended to keep the batteries charged and swap them while the camera is still on to avoid losing the settings.

Frequently asked questions