Replacing The Battery In Your Kangaroo Doorbell Camera

The Kangaroo Doorbell Camera is a smart home security device that alerts users when it detects motion or when the doorbell is rung. Unlike most smart doorbells, the Kangaroo doorbell camera uses three AA batteries that need to be replaced when they run out of charge. The batteries can be replaced by removing the back cover of the doorbell camera, which can be done by hand or with a thin screwdriver or small pin.

Tools required for the replacement

The good news is that replacing the batteries in your Kangaroo doorbell camera is a straightforward process that does not require any special tools. Here is a list of the tools you will need:

• New AA batteries: The Kangaroo doorbell camera uses three AA batteries, and it is recommended to use Alkaline AA batteries as they are easy to find and the mainstream battery type. You can also consider rechargeable AA batteries, which are more environmentally friendly and affordable in the long run. However, keep in mind that they may be less convenient if you don't have fully charged batteries on hand.
• Thin screwdriver or small pin (optional): In case the back cover of the doorbell is difficult to remove, you may need a thin screwdriver or a small pin to gently pry it open.
• 5 mm black screws (optional): If you are installing the doorbell camera for the first time or reinstalling it after battery replacement, you may need these screws.

That's it! You won't need any other tools to replace the batteries in your Kangaroo doorbell camera. The process is designed to be simple and quick, allowing you to get it done in just a few minutes.

Step-by-step process to open the device

To open your Kangaroo doorbell camera, first ensure that your doorbell is firmly installed. If the doorbell is not stable or your door is fragile, carefully remove the doorbell from the door.

On the bottom of the doorbell, you will find a spot designed for taking the back off. Grasp the bottom part and gently pull it towards you. This should cause the front part to pop out, allowing you to lift the whole cover off. If it does not release easily, you can use a thin screwdriver or a small pin to gently pry it up through the little hole on the bottom end.

Once you have successfully removed the back cover, you will be able to access the batteries inside the front end of the device. Simply take them out and replace them with new AA batteries.

After you have replaced the batteries, click the doorbell back into the back part. If you had to remove the doorbell from your door, remember to reinstall it securely.

Choosing the right replacement battery

The first thing to know about the Kangaroo doorbell camera is that it uses AA batteries. While any AA battery will work, there are some things to keep in mind when choosing a replacement. The best option is the Alkaline AA battery, which is widely available and the most common type. You don't need to spend extra on Lithium AA batteries, as they won't boost the doorbell's performance and their main advantage is their ability to handle extremely low temperatures, which is not necessary for the Kangaroo doorbell.

The Kangaroo doorbell is designed to work for multiple months on a single set of batteries, so regular AA batteries will suffice. However, if you're looking for a more environmentally friendly and cost-effective option, rechargeable AA batteries are a great idea. While they may be slightly less convenient as you'll need to ensure they're fully charged before replacing them, they can save you money in the long run and reduce waste.

To get the most out of your batteries, there are a few things you can do. Firstly, place your Chime near your doorbell camera. This will improve the wi-fi signal, resulting in longer battery life and quicker alerts. Secondly, avoid pointing your camera towards busy streets or high-traffic areas. Unnecessary alerts from these areas can drain your battery life. Finally, keep the motion sensitivity of your camera on "Average" unless you are in a rural area or have an obstructed view. The "Average" setting can detect motion within 8ft, resulting in less frequent alerts and longer battery life.

Calibrating the new battery

• Insert the new AA batteries: Open the battery compartment of your Kangaroo Doorbell Camera by grasping the bottom part and pulling it towards you. Lift the cover off and replace the old batteries with new AA alkaline batteries. Ensure they are inserted correctly, matching the positive and negative symbols.
• Reinstall the doorbell: Once the new batteries are in place, click the doorbell back into the back part of the cover. If you had to remove the doorbell from your door, now is the time to reinstall it.
• Test the doorbell: After reassembling the doorbell, test it by pressing the button to ensure it is functioning correctly. You may also need to test the motion detection and other settings to ensure the camera is working properly.
• Adjust settings for optimal battery life: To get the most out of your new batteries, adjust the motion sensitivity to "Average". This will reduce the frequency of alerts and extend the battery life. Additionally, consider placing your Chime near your Doorbell Camera to improve the Wi-Fi signal, which can also help prolong battery life.
• Monitor battery usage: Keep an eye on the battery life over the next few days and weeks. Depending on usage and settings, the batteries should last for at least a few months. If you notice rapid battery drain, you may need to adjust your settings or replace the batteries again.
• Consider rechargeable batteries: While not necessary, investing in rechargeable AA batteries can be more cost-effective and environmentally friendly in the long run. Just ensure they are fully charged before installing them in your doorbell.

By following these steps, you can ensure that your new batteries are properly calibrated and will provide optimal performance for your Kangaroo Doorbell Camera. Remember to keep an eye on battery life and adjust settings as needed to prolong their lifespan.

Disposing of the old battery

When disposing of your old batteries, it's important to be mindful of the environmental impact and follow proper disposal guidelines. Here are some detailed instructions on how to safely and responsibly dispose of the old batteries from your Kangaroo Doorbell Camera:

• Check with your local waste management service: Contact your local waste management authority or recycling centre to inquire about their guidelines for battery disposal. They may have specific instructions or drop-off locations for old batteries.
• Recycle the batteries: Regular AA batteries, such as the ones used in the Kangaroo Doorbell Camera, can often be recycled. Look for battery recycling programs in your area or visit specialised stores that offer battery recycling services. Some retailers, like electronics or hardware stores, may also have collection bins for used batteries.
• Do not dispose of batteries with regular trash: Old batteries contain chemicals and heavy metals that can be harmful to the environment if not disposed of properly. Never throw batteries into your regular trash bin.
• Consider battery type-specific disposal guidelines: Different types of batteries may have unique disposal requirements. For example, rechargeable batteries might need to be handled differently from single-use batteries. Always refer to the manufacturer's instructions or guidelines provided by your local waste management services.
• Store old batteries safely until disposal: If you can't dispose of the batteries immediately, store them in a safe place, out of the reach of children and pets. Old batteries can still retain some charge, so it's important to handle them with care to prevent any potential hazards.
• Encourage proper disposal practices: Educate your family, friends, and community about the importance of proper battery disposal. By spreading awareness, you can help reduce the environmental impact of battery waste and promote sustainable practices.

Remember, proper disposal of old batteries is crucial for minimizing environmental impact and ensuring the safe handling of potentially harmful materials. Always follow local guidelines and regulations, and consider recycling whenever possible. By disposing of your old batteries responsibly, you contribute to a greener and safer environment for everyone.

Frequently asked questions