Removing Monitors From The Extreme Mystery Aristocrat Machine

Removing a monitor from an arcade machine can be a tricky process, and it's important to take safety precautions to avoid electrical hazards. In this guide, we will outline the steps to safely remove a monitor from an Extreme Mystery Aristocrat Machine. Before beginning, ensure that the machine has been unplugged from the power source for several hours to reduce the risk of electrical shock. Additionally, wear protective gear such as gloves and eye protection to safeguard against any potential hazards.

Unplug the monitor and wait for the charge to dissipate

To unplug the monitor from the Extreme Mystery Aristocrat machine, follow these steps:

• Turn off the machine and unplug it from the electrical outlet.
• Disconnect the monitor's plug from the back of the machine.
• Wait for the charge to dissipate.
• Remove the monitor from the machine.

Disconnect the AC power cord and RGB/sync signal harness

To remove the monitor from an Extreme Mystery Aristocrat Machine, you must first ensure that the machine is unplugged and has not been powered up for years. This is because the monitor can store a charge that may deliver an electric shock. Once you have confirmed that the machine is safe to work on, you can begin the process of removing the monitor.

To disconnect the AC power cord and RGB/sync signal harness, follow these steps:

• Locate the AC power cord and the RGB/sync signal harness: The AC power cord is connected to the power source, while the RGB/sync signal harness is connected to the monitor.
• Unplug the AC power cord: Gently pull the cord out of the power outlet or, if it is connected to a power strip, disconnect it from there.
• Disconnect the RGB/sync signal harness: This harness will likely be connected to the back of the monitor. Gently pull the connector out of the port on the monitor. You may need to depress a small tab or latch to release the connector.
• Verify that the connections are secure: Ensure that the AC power cord and RGB/sync signal harness are no longer connected to the monitor or the power source.

By following these steps, you will have successfully disconnected the AC power cord and RGB/sync signal harness from the Extreme Mystery Aristocrat Machine, allowing you to proceed with removing the monitor from the machine. Remember to take appropriate safety precautions and refer to a qualified technician if you are unsure about any part of the process.

Unbolt the frame from the cabinet

To unbolt the frame from the cabinet of an Extreme Mystery Aristocrat Machine, follow these steps:

• Ensure the machine is switched off and unplugged from the power source.
• Disconnect the AC power cord and the RGB/sync signal harness from the monitor.
• Check that there is no ground wire or strap attached to the monitor frame.
• Begin to unbolt the frame from the cabinet. Depending on the model, you may need to remove screws, bolts, or other fasteners. Take note of the location and orientation of each fastener as you remove it to facilitate easier reassembly.
• Once all fasteners are removed, carefully lift the frame away from the cabinet.

It is important to work safely and methodically when performing these steps, especially when handling electrical components and heavy parts. Always be sure to disconnect the power source before beginning any work.

Check for a ground wire or strap attached to the monitor frame

When removing a monitor from an Extreme Mystery Aristocrat Machine, it is important to check for a ground wire or strap attached to the monitor frame. This is a safety precaution to prevent electrical shocks and reduce electromagnetic interference. If the ground wire is still attached to the monitor frame, it should be disconnected before attempting to remove the monitor.

The ground wire is typically connected to the metal casing or frame of the monitor to ensure a proper ground connection. In some cases, it may be bonded to the earth ground or chassis of the machine to further enhance safety. It is important to ensure that the ground connection is clean, tight, and metal-to-metal to maintain optimal conductivity.

Additionally, when working with electrical equipment, it is recommended to use insulated wires to prevent deterioration due to moisture. This is especially important for ground wires, as they play a crucial role in ensuring the safe operation of the machine.

Before beginning any work on the machine, make sure to disconnect the power source to avoid the risk of electrical shock. By following these precautions and instructions, you can safely check for and disconnect any ground wires attached to the monitor frame of the Extreme Mystery Aristocrat Machine.

Lift the monitor out

To remove the monitor from an Extreme Mystery Aristocrat Machine, you will need to take a few precautions and steps to ensure your safety and the proper removal of the monitor.

First, make sure the machine has not been powered up recently. While a monitor that has been disconnected from its power source for a long time poses little danger, a powered-up monitor can be extremely dangerous. The tube and some large capacitors on a monitor can store a charge, which can deliver a shock if you touch the wrong spot, even if it is unplugged. This charge usually dissipates within a couple of minutes to a few hours after the monitor is powered down, but it is best to exercise caution.

Next, disconnect the AC power cord and the RGB/sync signal harness from the monitor. Then, unbolt the frame from the cabinet, and check that there is no ground wire or strap attached to the monitor frame.

Now, you are ready to lift the monitor out. Carefully lift the monitor out of the cabinet, being mindful of the electrical risks mentioned earlier. Place the monitor in a safe location, and proceed with any further maintenance or replacement plans.

It is important to note that there is value to a non-working monitor, so proper disposal or recycling is recommended.

Frequently asked questions