Removing The Insignia Monitor Base: A Step-By-Step Guide

If you want to remove the base of your Insignia monitor, you'll need to prepare the monitor for disassembly, remove the stand, and then detach the base. First, lay the monitor face down on a table with a soft cloth or towel underneath to protect the screen. Then, remove the stand by squeezing the sides of the column cover and pulling it off. With the stand removed, you can detach the base using a Phillips screwdriver to remove the screws that secure the column to the monitor. Finally, wiggle the column loose from the monitor.

Lay the monitor face down on a towel to protect the screen

To begin the process of removing the base of your Insignia monitor, you must first lay the monitor face down on a towel to protect the screen. This step is crucial to prevent any accidental damage to your monitor's screen during the removal process. Choose a soft towel and place it on a flat, stable surface, such as a table or a desk. Ensure that the towel is large enough to cover the entire screen and provide a cushion for the monitor.

Once you have prepared the towel and designated work area, carefully lay the monitor face down on the towel. Make sure that the screen is fully protected and that the monitor is securely positioned on the towel. This step ensures that your monitor's screen remains scratch-free and undamaged throughout the process of removing the base.

With the monitor securely positioned on the towel, you can now proceed to the next steps of removing the base. This may involve removing screws, disassembling parts, or adjusting specific components, depending on your particular Insignia monitor model. Refer to your specific model's user manual for detailed instructions on how to proceed with the base removal process.

Remember, laying the monitor face down on a towel is a critical first step to ensure the protection of your screen. By taking this precaution, you can confidently proceed with the base removal process, knowing that your monitor's screen is safe from accidental scratches or damage. Always handle your monitor with care and follow the instructions provided by the manufacturer for the best results.

Remove the stand cover

To remove the stand cover from an Insignia monitor, you will need to follow these steps:

Firstly, lay the monitor face down on a flat surface, preferably a table. It is important to place a soft cloth or towel beneath the monitor to protect the screen from any potential damage.

Next, you will need to remove the stand cover. This is a small plastic piece that fits into the television just above the stand. Squeeze the sides of the column cover and pull it out of the slot on the bottom and middle part of the television. Some Insignia models may not have a stand cover, so if this is the case, you can move on to the next step.

Now, you will need to remove the screws that secure the column to the monitor. There should be three screws, which can be removed using a Phillips screwdriver.

Finally, wiggle the column to loosen it from the monitor and then remove it completely.

And that's it! You have now successfully removed the stand cover from your Insignia monitor.

Unscrew the screws that secure the column to the monitor

Unscrewing the screws that secure the column to the monitor is a crucial step in removing the base of your Insignia monitor. This process will allow you to detach the monitor from its stand, enabling you to mount it on a wall or make other adjustments. Here's a detailed guide on how to approach this task:

Prepare Your Workspace:

Before beginning, ensure you have a Phillips screwdriver, preferably a #3 Phillips, as this is the type of screwdriver that is compatible with Insignia monitor screws. Place your monitor face down on a table, and use a soft cloth or towel to protect the screen from scratches or damage. This step is important to avoid any accidental damage to your monitor during the disassembly process.

Access the Screws:

To access the screws that secure the column to the monitor, you will need to remove the column cover. Gently squeeze the sides of the column cover and pull it away from the monitor. This will expose the screws underneath.

Unscrew and Detach:

Using your Phillips screwdriver, carefully unscrew the three screws that secure the column to the monitor. Once the screws are removed, gently wiggle the column to loosen it from the monitor. You may need to apply some force, but be careful not to damage the monitor housing.

Safety First:

When handling the monitor, always hold it by the sides, avoiding the screen area. Additionally, ensure you have disconnected all cables and wires before beginning the disassembly process. This will prevent any accidental damage to the internal components or connections.

Reassembly:

If you need to reassemble the monitor stand, simply follow these steps in reverse. Ensure that you securely tighten the screws when reattaching the column to the monitor to maintain stability.

By carefully following these steps, you can successfully unscrew and remove the column from your Insignia monitor. Remember to refer to the user manual for additional model-specific details and always handle your monitor with care to avoid damage.

Wiggle the column loose from the monitor

Wiggling the column loose from the monitor is the final step in removing the stand base from your Insignia monitor. This process is necessary if you want to mount your monitor on a wall.

To wiggle the column loose, first lay the monitor face down on a table, with a soft cloth or towel beneath it to protect the screen. Then, squeeze the sides of the column cover and pull it off. Using a Phillips screwdriver, remove the three screws that secure the column to the monitor. Finally, wiggle the column loose from the monitor.

You can now follow the instructions that came with your mounting kit to mount your monitor on the wall.

Slide the base out of the holding slot

To slide the base out of the holding slot, you will need to first place the monitor face down on a table with a soft cloth or towel underneath to protect the screen.

Next, you will need to remove the stand cover, which is a small plastic piece that fits into the television just above the stand. Pull the stand cover out of the slot on the bottom and middle part of the television. Some Insignia models do not have a stand cover, so if you do not see one, you can skip this step.

Now, you will need to remove the screws that secure the base to the television. There should be eight screws located at the bottom and middle of the television, under the connection jacks. Use a Phillips screwdriver to remove these screws.

Once the screws are removed, you can grip the base and slide it out of the holding slot. It should slide out easily. Be careful not to tilt the television during this process, as it could damage the screen.

If you are having difficulty sliding the base out of the slot, you can try wiggling it gently back and forth to loosen it before sliding it out.

Frequently asked questions