Charging Drift Hd Camera Batteries: A Step-By-Step Guide

Charging your Drift camera battery is simple. You can use an external cradle charger, which you can plug into a standard wall socket or a car adapter. You can also charge your camera battery by plugging it into your laptop or computer. There are also replacement batteries available, which you can charge in your camera with a USB cable.

Using a wall socket

Charging your Drift HD camera battery using a wall socket is simple. You can purchase an external cradle charger that is compatible with your Drift HD camera. This charger comes with a three-pin plug for use in the UK, or a standard plug for use in the US. Clip your battery into the device, plug it into a wall socket, and your camera will be fully charged in approximately two hours.

This method of charging is ideal if you don't want to rely on charging your camera through your laptop or another device. The external cradle charger is also a convenient option if you're on the move, as it comes with a 12V in-car adapter, allowing you to charge your camera in your vehicle.

The external cradle charger is a great accessory to keep your Drift HD camera charged and ready for use, ensuring you don't miss any important shots while out and about.

Using a car power source

The Drift HD Cradle Charger is a great option for charging your Drift camera battery in the car. This charger comes with a 12V in-car adapter, allowing you to power and charge your camera while on the move.

To use the Drift HD Cradle Charger, simply clip your battery into the device and plug it into your car's power source. The charger is designed to work without a computer, so you can easily charge your camera while travelling. It takes approximately 2 hours to fully charge your Drift camera battery using this method.

The Drift HD Cradle Charger is compatible with the Drift HD, Drift HD720, and Drift HD170 camera models. It is also compatible with the Drift HD Ghost and the Drift Ghost-S Camera.

In addition to the Drift HD Cradle Charger, there are other options available for charging your Drift camera battery in the car. For example, the Drift Innovation HD170 Battery Charger is a home and car charger that can be used to charge the standard battery and long-life battery for the HD170 and X170 camera models. This charger also comes with a 12V in-car adapter, making it convenient for charging your camera on the go.

By using either of these charging options, you can ensure that your Drift camera battery stays charged and ready for use, even when you're away from a standard wall socket.

Using a laptop

Charging your Drift HD camera battery using a laptop is possible, but it may not be the most effective method. Some laptop USB ports do not have the required output to charge the camera battery to its full capacity.

To charge your Drift HD camera battery using a laptop, you will need a USB cable. Simply connect the USB cable to your laptop and then to your camera or battery. However, keep in mind that the charging time may vary, and it might take longer than using a dedicated charger.

If you frequently charge your Drift HD camera battery, investing in an external charger might be more convenient. External chargers, such as the Drift HD Cradle Charger, can be plugged into a standard wall socket or used with a 12V in-car adapter, providing faster charging and more flexibility.

Additionally, you can explore other charging options, such as the Wasabi Power Battery and Charger Kit, which includes two batteries, a charger, and a car adapter. This kit is compatible with the Drift HD, HD170, and Stealth cameras, providing up to two hours of recording time.

Remember to always follow the manufacturer's instructions and recommendations for charging your Drift HD camera battery to ensure optimal performance and battery health.

Using a car adapter

Step 1: Purchase a Compatible Car Adapter

Look for a car adapter that is specifically designed for the Drift HD camera. You can find these adapters online or at electronics stores. Make sure to buy one that is compatible with your camera model. Some adapters are designed for specific Drift camera models, so check the product description carefully before purchasing.

Step 2: Connect the Car Adapter

Once you have purchased the correct car adapter, it's time to connect it to your car. The adapter will typically have a 12V DC output that you can plug into your car's cigarette lighter or power outlet. Make sure your car is turned on so that the adapter can draw power from the vehicle.

Step 3: Connect the Charger to the Camera Battery

Now, you need to connect the charger to your Drift HD camera battery. Remove the battery from your camera and locate the charging port on the battery. Connect the charger to the battery's charging port, ensuring a proper connection.

Step 4: Charging

The car adapter should now be providing power to charge your Drift HD camera battery. The charging time may vary depending on the capacity of your battery and the power output of the car adapter. You can refer to your camera's user manual to get an estimate of the charging time.

Step 5: Monitoring the Charging Process

Some car adapters come with LED indicators that show the charging status. If your adapter has an LED indicator, you can monitor the charging process. A flashing or red light typically indicates that the battery is charging, while a solid green light indicates that the battery is fully charged.

Step 6: Safe Handling

Always follow the safety guidelines provided by the manufacturer when using a car adapter to charge your Drift HD camera battery. Ensure that you unplug the adapter from the power source when it's not in use. Properly store the adapter and battery in a cool, dry place to maintain their longevity.

Using a cradle charger

The Drift HD Cradle Charger is an essential accessory for those on the move. It allows you to charge your Drift HD camera without the need for a computer. Here is a step-by-step guide on how to use the Drift HD Cradle Charger:

Step 1:

Clip your Drift HD battery into the cradle charger device. Ensure that the battery is securely attached to the charger. The cradle charger is designed to be a convenient and portable charging solution for your Drift HD camera.

Step 2:

Plug the cradle charger into a standard wall socket. The charger comes with a two-pin or three-pin plug, depending on your region. For example, the EU version has a two-pin plug, while the UK version has a three-pin plug. This allows you to charge your camera directly from a wall socket.

Step 3:

Alternatively, you can use the included 12V in-car adapter to charge your camera on the go. This is especially useful if you are travelling and do not have access to a wall socket. Simply plug the adapter into your car's power source and connect it to the cradle charger.

Step 4:

It takes approximately 2 hours to fully charge your Drift HD camera battery using the cradle charger. The charging time may vary depending on various factors such as battery capacity and usage. Once the battery is fully charged, you can unplug the cradle charger and detach the battery from the device.

Step 5:

Now that your Drift HD camera battery is fully charged, you can insert it back into your camera and start capturing your outdoor adventures. The cradle charger helps to ensure that your camera is always ready for use, so you don't miss any memorable moments.

Frequently asked questions