Charging Cove Outdoor Camera: A Step-By-Step Guide

The Cove Outdoor Camera is a wireless outdoor security camera that can be installed anywhere outside your home. The camera runs on a 2.4GHz network and communicates using the Cove app. The average battery life of the camera is 2 months, depending on usage, and it takes roughly 8 hours to fully charge. The camera can be charged by removing the outer shell and inserting the battery into the slot, ensuring the positive end of the battery is facing the back of the camera.

The average battery life is 2 months, depending on usage

The Cove Outdoor Camera has an average battery life of two months, depending on usage. This means that the battery life can be shorter or longer than two months, depending on how you use the camera.

If you use the night vision or LED lights, or if you spend a lot of time viewing the camera feed and recordings, your battery life may be shorter than two months. On the other hand, if you rarely use these features or access the camera feed, your battery life may last longer than two months.

When the battery gets low, an indicator on the Cove app will prompt you to change it. If the battery is completely dead, the app will report that the camera is offline and suggest that it needs to be charged. The battery needs to be charged before pairing, and it takes roughly eight hours to fully charge. You'll know the battery is charging when the indicator light is red, and that it's fully charged when the light turns green.

To charge the camera, first remove the outer shell of the camera. Inside, you will see a slot for four batteries if you have version 1 of the camera (purchased before July 2021), or a slot for a battery pack if you have version 2 (purchased after July 2021). Ensure the positive end of the battery is facing the back of the camera, then screw the outer shell back on.

It takes roughly 8 hours to fully charge the battery

The Cove Outdoor Camera's battery takes roughly 8 hours to fully charge. It is important to note that the camera needs to be charged before pairing and mounting. The indicator light on the camera will be red when it is charging and will turn green when the battery is fully charged.

To charge the camera, first, remove the outer shell of the camera to reveal the battery slot. The camera takes either four batteries (for version 1 purchased before July 2021) or a battery pack (for version 2 purchased after July 2021). Ensure that the positive end of the battery is facing the back of the camera.

Once the battery is inserted, screw the outer shell back on and wait for the camera to say "Waiting to Connect". At this point, you can start the pairing process by opening the Cove app and following the prompts.

It is worth noting that the average battery life of the camera is 2 months, depending on usage. The app will prompt you to change the batteries when they get low. If the battery is completely dead, the app will report that the camera is offline and suggest that it needs to be charged.

The indicator light will be red when charging and green when fully charged

The Cove Outdoor Camera has a battery life of 2 months on average, depending on usage. When the battery gets low, the indicator on the app will prompt you to change it. If the battery is completely dead, the app will report that the camera is offline and suggest that the battery needs to be charged. The battery needs to be charged before pairing, and it takes roughly 8 hours to fully charge.

The indicator light on the Cove Outdoor Camera will be red when charging and green when fully charged. This means that if the indicator light is red, the battery is charging. If the indicator light is green, the battery is fully charged and ready to be used.

The indicator light is a useful feature that allows users to easily monitor the charging status of their Cove Outdoor Camera. By observing the indicator light, users can ensure that their camera is fully charged and ready for use. This helps to ensure that the camera is functional and can provide continuous security monitoring.

It is important to note that the charging time may vary depending on factors such as the age of the battery and the charging conditions. Additionally, it is recommended to follow the manufacturer's guidelines for charging and maintaining the camera to ensure optimal performance and battery health.

The camera must be charged before pairing

To ensure your Cove Outdoor Camera is ready for pairing, it is important to charge the camera beforehand. Here is a detailed guide on charging the camera and some related information:

Charging the Cove Outdoor Camera:

• The Cove Outdoor Camera is battery-operated, and the batteries need to be fully charged before pairing.
• The average battery life of the camera is about two months, depending on usage. Factors such as the use of night vision or LED lights, and the time spent viewing the camera feed and recordings, can deplete the battery life.
• When the battery is low, an indicator on the Cove app will notify you to change them. If the battery is completely drained, the app will indicate that the camera is offline and suggest charging the battery.
• It takes approximately eight hours to fully charge the battery.
• The indicator light on the camera will be red when it is charging, and it will turn green when the battery is fully charged.

Pairing the Camera:

• After ensuring the camera is fully charged, you can begin the pairing process.
• Remove the outer shell of the camera and insert the batteries, ensuring the positive end of the battery is facing the back of the camera.
• Open the Cove app on your phone and navigate to the "Cameras" section by clicking on the icon at the bottom right.
• Click on the "+" icon to add a new camera, and select "Cove Outdoor Camera" from the options.
• If prompted for access to your phone's camera, click "allow." This will open a QR code scanner.
• Align the QR code on the back of the camera with the scanner, and if successful, click on "Set up the Camera" and then "I heard Waiting to Connect."
• Provide your Wi-Fi information, ensuring that your phone is connected to a 2.4GHz network. Enter your Wi-Fi password, being careful with special characters and capitals.
• Once the Wi-Fi information is provided, your phone will generate a QR code. Hold your phone about 12 inches away from the camera and slowly move it closer to the lens.
• Wait for the camera to indicate a successful QR code scan, and then click "Next" on the app.
• If pairing is successful, the app will connect to Wi-Fi, and you can name your camera and save it.

Remember, if you encounter any issues during the charging or pairing process, you can always contact Cove's support team at 855-268-3669 for assistance.

The camera runs off a 2.4GHz network

The Cove Outdoor Camera runs off a 2.4GHz network. This means that if your router is dual-band, you must ensure your phone is connected to the 2.4GHz network before starting the pairing process.

If you are unsure what network your router is broadcasting, you can contact your Internet Service Provider, who will be able to tell you which network you are on and how to switch to the 2.4GHz network if necessary.

The Cove Outdoor Camera communicates using the Cove app. If you do not see the camera icon at the bottom right of your app's home screen, you can call Cove's support line at 855-268-3669, and they can help you get the camera added.

The pairing process requires you to insert the battery into the camera by removing the outer shell of the camera. You will then see a slot for a battery pack, as well as the QR code on the back or side of the camera's interior. Insert the battery, ensuring the positive end is facing the back of the camera.

Next, open the Cove app and go to the "Cameras" section at the bottom right. Click on the little (+) icon to add a new camera. This will prompt you to choose a camera type, so make sure you click "Cove Outdoor Camera."

You may then be asked to allow access to your phone's camera. If so, click "allow." This will pull up a QR code scanner. Align the QR code on the back of the camera with the square on your phone. If the scan is successful, a page will appear with "Set up the Camera." Click on "I heard Waiting to Connect."

You will then need to provide your WiFi information. If your phone is connected to a 2.4GHz network, the WiFi name or SSID will be automatically populated in the top text field. If your phone is not connected, you will need to connect to your WiFi and then go back to this page. Enter your WiFi password, paying attention to capital letters and special characters. Once you have entered your WiFi information, click "Please choose WiFi."

Your phone will then generate a QR code. Hold your phone about 12 inches away from the front of the camera and slowly move it closer to the camera lens. Wait for the camera to say, "QR code scan is successful." Then, click "Next" on the app screen.

If the pairing is successful, your app will report that the camera has connected to the WiFi. If it is not successful, the camera will tell you the error, and you can follow the suggested prompts on the app.

Once your camera has successfully paired with the app, you can name your camera or choose from a list of preselected options. Finally, click "Save."

Frequently asked questions