Charging The Wyze Outdoor Camera: How Long Does It Take?

The Wyze outdoor camera is a battery-powered device that can be charged via a power outlet or a base station. It takes approximately 4 hours to fully charge the camera from 0% to 100%. However, some users have reported longer charging times, with one user stating that their camera had been charging for 12 hours and had only reached 65% battery. To improve the battery life of the Wyze outdoor camera, it is recommended to limit the use of scheduled recordings and the timelapse feature, and to place the camera in a low-traffic area.

Charging time: 4-5 hours

The Wyze outdoor camera is a battery-powered device that offers flexibility and convenience for users. One of the key advantages of this camera is its long-lasting battery life, which can typically last between 3 to 6 months. However, the charging time for the Wyze outdoor camera is relatively short, usually taking around 4 to 5 hours to fully charge. This means that even if your camera's battery is completely drained, you won't have to wait too long to get it back up and running.

When charging your Wyze outdoor camera, it's important to use the correct charging method and equipment. The camera comes with a base station that needs to be plugged into a power outlet. You can then connect the camera to the base station using the provided power cable. During the charging process, the camera's LED light will flash red, and once it's fully charged, the light will turn solid red. It's worth noting that you can continue using the camera while it's charging, but doing so may slow down the charging process.

To optimise the charging time and efficiency, there are a few things to keep in mind. Firstly, make sure to use the charging cable that came with your Wyze camera package. Using a different cable could result in slower charging or even damage the device. Secondly, avoid charging the camera outdoors, as mentioned earlier. This is because the Wyze outdoor camera is designed to be weather-resistant, not weatherproof, so direct exposure to the elements may harm it. Lastly, try to limit the use of the camera while it's charging, as this will help ensure a faster and more efficient charging process.

By following these instructions and allowing sufficient charging time, you can ensure that your Wyze outdoor camera stays powered up and ready to capture all the important moments, whether you're using it for home security or simply monitoring wildlife in your backyard.

Charging cable: use the cable that comes with the camera

To charge your Wyze outdoor camera, it is important to use the correct charging cable. The camera comes with its own charging cable in the box, and this is the one you should use. Using a different cable may result in slow charging or no charging at all.

The charging cable that comes with the Wyze outdoor camera is a specific type of USB cable. It is designed to fit the unique charging port on the camera, and it is also rated to provide the correct power output for the camera's battery. The Wyze outdoor camera requires a minimum of 5V/2A to charge properly, so using a cable that cannot deliver this power output could result in slow or incomplete charging.

In addition, the charging cable that comes with the camera is likely to be of higher quality than a generic USB cable. This is important because the camera's battery is relatively small and can be damaged by incorrect voltage or current levels. Using the supplied cable helps to ensure that the camera receives the correct power input and charges safely and efficiently.

Furthermore, the supplied cable is likely to be more durable than a generic alternative. This is important because the cable will need to be connected to the camera and a power source, which may involve some stress on the cable. A low-quality cable could become damaged or frayed, which could not only affect charging performance but also pose a safety risk.

Therefore, it is always best to use the charging cable that comes with the Wyze outdoor camera. This will ensure optimal charging performance and help to keep your camera's battery healthy and prolong its lifespan.

Charging port: check for obstructions

If your Wyze Outdoor Camera is not charging, it could be due to an obstruction in the charging port. To resolve this, first, check the charging port on the camera for any debris or dirt. Use a soft, dry brush or compressed air to gently clean the charging port. Ensure that the charging port is free of any debris or dirt before attempting to charge the camera again.

If the charging port appears clear, firmly insert the charging cable into the port. Ensure that the cable is inserted properly and securely. Check that the cable is not damaged and is firmly connected to the power source. If the cable is inserted correctly and there is no damage, but the camera still does not charge, try using a different charging cable that meets the Wyze Outdoor Cam charging requirements (5V/2A).

If you have tried multiple cables that meet the charging requirements and the camera still does not charge, the charging port on the camera may be faulty. In this case, you may need to contact Wyze customer support for further assistance or to request a replacement camera.

To prevent obstructions in the charging port, it is important to regularly clean the port and store and use the camera in a dry and clean environment. Additionally, always handle the camera with clean hands and ensure that the charging cable is inserted properly to avoid any damage to the port.

Charging indication: flashing red light

If your Wyze outdoor camera is displaying a flashing red light, this means that your camera is plugged into a power source and is currently charging.

The length of time it takes to charge a Wyze outdoor camera varies. One user reported that it took 4-5 hours to charge their camera from 29% battery life to 100% when plugged directly into a wall outlet. Another user reported that after 12 hours of charging, their camera was at 65% battery life.

If your camera is displaying a quickly flashing red light, this means that your camera needs to be restarted. To do this, press and hold the SYNC button for 10 seconds.

If your camera is not displaying a flashing red light, this could mean that your camera is in power-saving mode, the battery is below 20%, or the camera is not charging.

For more information on the status of your Wyze outdoor camera, consult the Status Light Guide in the Wyze app.

Battery life: 3-6 months

The Wyze outdoor camera has an impressive battery life of 3 to 6 months. This is a significant advantage, as it means you won't need to worry about constantly recharging your camera. The battery life will depend on various factors, such as the level of activity in the area the camera is monitoring, and the constant use of features like time-lapse and scheduled recording. To get the most out of your battery, it is recommended to limit the use of these features.

The camera's battery specifications are 7.4V Rechargeable – 2600mAH, and it takes approximately 4 hours to charge from 0% to 100% using a power outlet. You can also use a solar panel to charge your camera, but be sure to follow the instructions carefully when setting it up.

When charging your Wyze outdoor camera, you'll see an indication that it is charging during the live footage from the camera, and the camera LED light will show a flashing red light. Once it is fully charged, the light will become solid red. You can charge your camera whether it is on or off, but it is recommended to avoid charging it outdoors.

To improve the battery life of your Wyze outdoor camera, try placing it in a low-traffic area and charging it using the base station at all times. Additionally, limit your use of scheduled recordings and only view the live stream when needed. By following these tips, you can maximise the battery life of your Wyze outdoor camera and ensure it lasts for several months before needing to be recharged.

Frequently asked questions